AC Series angular contact ball bearing

Angular contact ball bearings can withstand both radial and axial loads. They can work at higher speeds. The larger the contact angle, the higher the axial load carrying capacity. High precision and high speed bearings usually take 15 degrees contact angle. Single row angular contact ball bearings can only withstand a direction of axial load, in the bear radial load, will cause additional axial force. And can only limit the shaft or shell in a direction of the axial displacement. If it is installed in pairs of duplex, make a pair of bearing outer ring relative, that is, wide end face wide end face, narrow end face narrow end face. This can avoid causing additional axial force, and can be in two directions so that the shaft or shell limited in the axial clearance range.

Angular contact ball bearing because of its inner and outer ring raceway can be in the horizontal axis of the relative displacement, so can simultaneously withstand radial load and axial load, cage material has brass, synthetic resin, etc., according to the bearing form, the use of conditions and distinction.

Applications: machine tool spindles, high-frequency motors, combustion turbines, booster pumps, drilling platforms, food machinery, indexing heads, welding machines, low-noise cooling towers, electromechanical equipment and so on.